Precision Renovators cover East Kilbride and the surrounding G74 and G75 postcodes seven days a week, with same-day attendance on most emergency calls. We handle boiler repairs and replacements, servicing, central heating, bathrooms and full Gas Safe certification across the town — from the original 1950s and 60s new town housing to the newer estates at Lindsayfield and Jackton.
East Kilbride’s housing mix matters more than people expect. The town was built in waves, and each wave came with a different heating setup. Knowing which one you have saves time on the phone and money on the job.
Services We Cover in East Kilbride
- Boiler repair and breakdowns — same-day diagnosis and repair, with common parts carried on the van. Our boiler repair cover runs seven days a week.
- New boilers — combi swaps, back boiler removals and system upgrades, with full boiler installation and warranty registration. See our dedicated East Kilbride installation page.
- Annual servicing and certificates — homeowner services and landlord gas safety records.
- Central heating — radiators, valves, smart controls, power flushing and full central heating installs.
- Emergency plumbing and heating — leaks, burst pipes, no heat and no hot water, through our emergency heating repair service.
- Bathrooms — full bathroom renovation, wet rooms and accessible showers.
Response Times and Coverage
| Job type | Typical response |
|---|---|
| Gas leak or unsafe appliance | Immediate — call 0800 111 999 first, then us |
| No heating or no hot water | Same day, usually within 1–3 hours |
| Leak or burst pipe | Same day |
| Boiler service or CP12 | Next available slot, usually 2–5 days |
| Heating or bathroom quotation | Survey within a week, written quote in 48 hours |
We cover the Village, Calderwood, Westwood, Murray, Whitehills, St Leonards, Stewartfield, Lindsayfield and Jackton, and work regularly across Glasgow, Paisley, Hamilton, Motherwell and Rutherglen.
What East Kilbride’s Housing Mix Means for Your Heating
Original new town housing (1950s–1970s)
Many of these properties started with a back boiler behind a gas fire, or electric storage heating. Where a back boiler is still in place, replacement is now a full system change rather than a swap — new appliance, new flue route, often new pipework and a chimney liner or capped stack. It is a bigger job than a straight combi replacement, and any quote that does not mention the flue has not looked properly.
1980s and 1990s estates
These usually have a conventional system boiler with a hot water cylinder in an airing cupboard. Converting to a combi frees up the cupboard, but only makes sense if the household is not running two showers at once. We will tell you when staying with a system boiler and a modern unvented cylinder is the better answer.
New builds at Stewartfield, Lindsayfield and Jackton
Newer homes typically have a system boiler with an unvented cylinder, or increasingly a heat pump. Two things follow: unvented cylinders legally require annual servicing by a qualified engineer, and a loss of hot water in these properties is more often a cylinder, immersion or thermostat fault than a boiler fault. Diagnosing it as a boiler problem wastes a visit.
What It Costs (2026)
| Job | Typical price (2026) |
|---|---|
| Standard hours call-out and diagnosis | £70 – £110 |
| Out-of-hours emergency call-out | £110 – £180 |
| Annual boiler service | £70 – £110 |
| Landlord gas safety record (CP12) | £75 – £120 |
| Combi boiler replacement (like for like) | £1,900 – £3,200 |
| Back boiler removal and combi conversion | £3,200 – £4,800 |
Grant funding sometimes applies to heat pump work — the Scottish Government runs its own home energy schemes, and the Energy Saving Trust publishes current eligibility. We will tell you if your property is a realistic candidate rather than talking you into it.
Why Choose a Gas Safe Certified Engineer?
Gas work is legally restricted to registered engineers, and the Gas Safe Register lets you check any card in under a minute. Registration also keeps warranties valid and gives landlords defensible paperwork. Every engineer we send to East Kilbride carries a current card and shows it on the doorstep. Our wider plumbing and heating services run to the same standard.
You may also like our guides on choosing between boiler types and preparing for a boiler installation.
Frequently Asked Questions
Do you charge extra to travel to East Kilbride?
No. East Kilbride is inside our standard coverage area and rates match our Glasgow pricing. Only the out-of-hours premium changes the rate.
How fast can you attend a boiler breakdown in East Kilbride?
Most breakdowns are attended the same day, usually within one to three hours. You get a real arrival window on the phone, not an all-day slot.
Can you remove a back boiler?
Yes, and it is one of the most common jobs we do in the older parts of town. It is a full system change rather than a swap, so we survey first and quote a fixed price covering the appliance, flue, pipework and making good.
My hot water has stopped but the heating works — is the boiler broken?
Not necessarily. In properties with a cylinder it is more often the immersion, cylinder thermostat or a motorised valve. Tell us which system you have when you call and we will bring the right parts.
Do you service unvented hot water cylinders?
Yes. Unvented cylinders need an annual service by a suitably qualified engineer, covering the expansion vessel, pressure reducing valve and safety valves. We can service the boiler and cylinder in the same visit.
Do you issue landlord gas safety certificates?
Yes, for private landlords and letting agents across East Kilbride, with a reminder set so the certificate never lapses.
Ready to Get Started?
Precision Renovators are Gas Safe certified plumbing and heating engineers covering East Kilbride, South Lanarkshire and Glasgow. We diagnose before we quote, put the price in writing before work starts, and tell you honestly when a repair is not worth doing. Browse our services or see our projects.
Get a Free Quote — or call and WhatsApp us on 07495 816227.
